|
|
|
FSFlyingSchool Pilot
Group: Forum Members
Last Login: Tuesday, August 11, 2015 10:33:23 AM
Posts: 2,
Visits: 3
|
|
Just purchased this program and starting per the instructions, cannot access the manual from the flight plan page, and have repeated some approaches by disconnecting and then re-connecting, but have no place to get a landing report and map is not functioning. My question is do I need to uninstall and re-install the program? I am running FSX Gold. Thanks
lewblok
|
|
|
|
|
FSFlyingSchool Pilot
Group: Forum Members
Last Login: Tuesday, August 11, 2015 10:33:23 AM
Posts: 2,
Visits: 3
|
|
| FSIA PRO is what I am working with. Sorry
|
|
|
|
|
FSFlyingSchool Training Captain
Group: Moderators
Last Login: Tuesday, December 20, 2022 2:42:12 PM
Posts: 1,645,
Visits: 14,276
|
|
Hi there lewblok
Let me start by saying that I am not an employee of FSInventions - I am a very happy user of the different FSInventions programs since version 1 of FSFlyingSchool. I have beta tested a lot of versions over the years, so i do hold a pretty fair knowledge of the different programs.
So there you have it - I am but a humble user, like yourself - but let me try to sort out what you say.
1) You cannot access the manual from the flightplan tab - no - the manual is accessed from the "information" tab - Press reddish button "View manual" - in the low left corner. It´s a PDF document, so you need a .PDF reader to actually show it.
2) You have disconnected and reconnected to get approaches - all good - but remember that you can also flip the panel light (keystroke - Shift-L) to get a new approach - directly from within the aircraft in FSX.
You get no landing report. No, FSInstant Approach Pro (FSIA) is a approach builder program. You set up approaches and fly them, but no landing reports. This is a feature in FSFlyingSchool 2015 Pro (FSFS) Here you get the great features from FSIA, (Along with a ton of other great features) and during your approaches in FSFS, you get an instructor evaluating your every move along the approach - AND a landing report when landed.
3) The map feature dosen´t work for you. Hm... I just flew a few approaches and it works fine for me. But remember that you have to either END the flight, by landing on the chosen runway - and STOP the aircraft - OR press the disconnect button. Then you´ll see on the Flight plan tab - low left corner - just below the blue button marked "View all maps" - a new blue button will appear - called "Save and view map of flight" Press this button and your browser pops up with a new tab (or simply opens) with the map of the approach you just did.
Hope this helps - if not, then post again and I´ll leave it to SL himself. 
Regards
Ole Andreasen, Denmark
|
|
|
|